Static and crackle
Fizzing, crackling noise from a poor connection, a worn cable, or a noisy input.
Static, buzz, and hum remover
Crackle, buzz, and a low electrical hum sit under every word of a recording. Upload the file and Clean Voice reduces them so the voice is what you hear.
Play the sample and switch between the original and the cleaned version. This sample shows general background noise removal, not a static-only test, so judge the result on your own file.
Select the waveform to play or pause
Recording comparison
Clean podcasts, interviews, courses, voiceovers, and recordings with a focused background-noise workflow.
Switch between the original and cleaned recording.
People use the word static for almost any electrical noise in a recording, but there are three distinct sounds, and it helps to know which one you have.
Static is a rough, crackling or fizzing sound, like a radio between stations. It is broadband: it covers the whole range of hearing, including the range of the voice. Hum is a steady low tone at 50 or 60 Hz, the frequency of mains electricity. Buzz is hum with harmonics stacked on top, which gives it a harsh, raspy edge that cuts through speech.
All three share one property that makes them good candidates for cleanup: they are constant. They do not change with the words. Clean Voice separates the steady noise from the speech and turns the noise down. You upload a file, it processes the soundtrack, and you compare the result before downloading.
Steady noise that comes from the equipment, not from the room.
Fizzing, crackling noise from a poor connection, a worn cable, or a noisy input.
A low 50 or 60 Hz tone picked up from power supplies and nearby wiring.
The harsh buzz that appears when two devices are plugged into different outlets.
The constant shh of a budget microphone or a gain knob turned up too far.
Whine and chatter that leaks into a USB microphone, often worse while charging.
Noise on digitized cassettes, old recordings, and recorded phone lines.
Most static has a simple cause, and finding it means the next recording will not need fixing.
Gain set too high is the most common one. Every microphone and interface has a noise floor. If you speak quietly from far away and raise the gain to compensate, you raise the noise with it. Moving closer and lowering the gain gives a cleaner signal.
Cables and connectors come next. A loose 3.5 mm plug, a bent USB cable, or a worn XLR lead produces crackle that comes and goes when the cable moves. Swapping the cable is a quick test.
Power is the usual source of hum and buzz. A laptop on its charger, a cheap USB hub, a dimmer switch, or a phone lying next to the cable can all inject noise. If the noise disappears when the laptop runs on battery, you have found it.
Finally, built-in sound cards and very cheap microphones are simply noisy. In that case the fix is cleanup after recording, or better equipment.
Every editor has a way to do this. They differ in how much setup they need.
Noise Reduction needs a section of pure noise as a profile, then three sliders. It is free and effective on steady noise, but too much leaves watery artifacts.
A narrow cut at 50 or 60 Hz removes pure hum. Buzz needs a cut at every harmonic, and static cannot be removed with EQ at all.
DeHum and DeNoise effects work well and come with a subscription. You still choose the amount by ear.
The Fairlight page includes noise reduction and a de-hummer. It is powerful if you already edit there.
Upload the file in your browser and let the AI process it. No noise profile to capture and no frequencies to find.
If you know the noise is pure hum and you already have an editor open, a notch filter is quick. For static, buzz, or mixed noise, an AI cleanup is usually less work.
Constant noise under a clear voice is reduced well. Two cases are harder, and it is better to know before you upload.
Clipping is not static. If the recording was too loud and the peaks are flattened, the crackle you hear is distortion in the voice itself, and noise removal will not restore it.
Dropouts and digital glitches, where part of the audio is missing or scrambled, cannot be rebuilt. Loud, irregular crackle that lands on top of words can also leave traces. In all of these cases, play the cleaned file before downloading. Failed tasks do not use credits.
Everything happens in the upload box at the top of this page.
Drop an MP3, M4A, WAV, or AAC file, or a video in MP4, MOV, or WebM.
Sign in and start the task. Clean Voice reduces the static, buzz, and hum on the soundtrack.
Play the cleaned file next to the original and download it when you are happy with it.
Anything recorded through cheap or badly powered equipment.
Podcasts and voiceovers recorded on a laptop that was charging.
Stream and call recordings with a constant hiss or buzz.
Recorded calls with line noise under both voices.
Cassettes, dictaphone tapes, and old family recordings.
Video recorded through a noisy camera preamp or a wireless microphone with interference.
Tutorials recorded through a built-in sound card.
Upload the recording in the box at the top of this page, sign in, and start the task. Clean Voice reduces the static on the soundtrack, and you can compare the result with the original before you download it.
Yes. Mains hum, ground-loop buzz, microphone hiss, and static are all steady noises, and the same upload handles them. You do not need to tell the tool which one you have.
New accounts get 10 free credits with no credit card. One credit covers one minute of audio or video, so you can clean up to 10 minutes before choosing a plan.
Yes. Upload an MP4, MOV, or WebM file. Clean Voice processes the soundtrack and returns the video with the original picture and the cleaned audio.
The usual causes are gain set too high, a damaged or loose cable, electrical interference from a charger or USB hub, and noisy built-in sound cards. Moving closer to the microphone and lowering the gain reduces it at the source.
No. Clipping is distortion of the voice itself, not noise added to it. Noise removal reduces what is behind the voice and cannot rebuild peaks that were cut off.
No. It cleans files you have already recorded. It does not run on a live microphone or inside a call.
Audio supports MP3, M4A, WAV, and AAC. Video supports MP4, MOV, and WebM. Files can be up to 1 GB and 30 minutes long.
Start with 10 free credits, or choose a credit plan for longer recordings.